MAXTRAK 1000:
Superior technology for natural stone processors!

The Maxtrak 1000 from TEREX PEGSON should not be missing when you need high throughputs and the best possible particle shapes. In spite of having compact transport dimensions and short set-up times, this plant performs daily as if it were in the next highest performance class.

• The effect of the bearings:
  High-quality roller bearings allow higher forces to be taken on, which in turn provides immediate benefits.
  
  
• Advanced control:
  The gap is adjusted during live crushing operations, and the optimal particle grading curve is achieved.
  
  
• It pays to be safe!
  When the crusher becomes overloaded, the large cylinder opens the aperture to the desired width. The MAXTRAK automatically starts operating again using the preselected settings.
  
  
• Direct drive = diesel savings:
  Due to the HFO transmission, almost 100% of the power from the engine is actually transferred to the crusher.
  
  
• Fully developed mass production:
  TEREX PEGSON is the largest manufacturer of crushing plants worldwide. Customers benefit from experience and innovation.
  
  

FACTS

The cone is the heart of the crushing plant. This component is the decisive factor determining success or failure. TEREX PEGSON only builds roller-bearing conical crushers. This complex design allows higher forces to be taken on, which you will notice immediately once you put it into operation:
a) Higher performance = more throughput for the same cone size.
b) Large crushing chamber = more performance and better-shaped particles due to a "particle on particle" crushing process.
c) From a) and b), it follows that trouble-free processing is possible for fine particle percentages of up to 20%.
d) Wear parts can be used almost "all-round" thanks to a large design reserve.

SUMMARY

"Salespersons are often show-offs, but not in this case! You have to see the MAXTRAK 1000 with your own eyes. I didn't think it was possible."

   WORKING/TRANSPORT DIMENSIONS